How To Wash Your Fence With A Pressure Washer

If you have a good pressure washer, you will not need to play any tricks in order to get your job done. In fact, if you use your pressure washer correctly, you will probably find that this chore only takes a few minutes.

The only thing you really need to worry about are damaged areas of your fence. Because some pressure washer can shoot out water at over 1,000 pounds per square inch (PSI), you could aggravate existing damage if you are not careful. If your washer has different settings, you might try a lower one on any areas that appear to be damaged so you do not make the problem worse.

Even though the job is fairly easy, it can still be a dirty job. Make sure you change into comfortable clothes that are easy to wash. You should expect to need a shower after you finish. You are bound to toss up a lot of dirt and debris from the fence and your yard.

Also be aware that these powerful powered machines are not toys. Never take the chance of accidentally hitting a person or pet and keep them away from your kids. If you let an older teen learn to use your washer, please supervise him until you are certain that he knows the rules.

If you are buying or renting a pressure washer to do this job, you only need about 1,000 to 2,000 pounds per square inch of power. Don’t get a more powerful unit unless you have the ability to control the pressure of the stream. If you can select different spray tips, fifteen and twenty-five degree tips are useful for this particular job.

 Steps To Power Wash Your Fence.

The steps to begin your job are outlined below. As a caution, never run the engine unless the pump and hose is already filled with water. Otherwise, you risk overheating the machine and even burning out the pump.

Simply connect your old garden hose to your washer.

Then make certain that you plug your electric washer in using a heavy-duty outdoor extension cord.

Then you can simply turn on the water to the pressure washer and pull the machine’s trigger until water starts spraying out.

Finally, start up the washer’s engines. Again, remember not to turn on the engine until you have water in the pump.

Keep the tip of your washer’s wand about eighteen inches from the fence. Move the stream up and down along the boards. Be sure you keep the spray moving, or else you might risk damaging your wood. You might have to change your angle a bit to get close to corners.

As you’re working, always be aware of the power that this high-pressure stream of water can deliver. You will be able to clean off years of dirt, dust, and even caked-in grime. You can also strip off outer levels of faded wood to reveal the fresh wood underneath.

But be careful. If you hold the washer in one spot too long, you can damage your fence and take off more wood than you wanted to. Also remember to avoid any existing damaged spots.

Do you have plants that are growing alongside your plants. It is unlikely that your pressure washer can damage a full-grown tree, but it might take out a sapling or small bush. Be sure to tie back or avoid any smaller plants so you do not accidentally ruin them.

It can take a bit of practice to learn how to efficiently use a power washer to clean your fence. It is better to make a few more passes on each board than to risk damaging the wood, so go fairly slow while you begin to learn how to use their machine.

Once you have gotten your fence clean, it might even look like it did the day you had it put in. This might be a good time to do a few repairs and apply a wood fence preservative to prolong the life and beauty of your great fence.

 Further Tips on Pressure Washing Your Wooden Fences

Pressure washing a fence may seem extremely simple but you would be surprised how many people can get it wrong, even to the extent that they damage their fence! One of the main problems is the colour and damaging the shade of colour, so always start further away and test, then you can move closer once you’re satisfied your not damaging the color or wood in anyway.

So whether you own your own home or you are doing some home maintenance work for someone else, there may come a time when you need to know how to clean a wooden fence properly. If you have the equipment, pressure washing a wooden fence can be a fast and efficient way to get the job done.

In order to get the best possible result, you will need to look into some of the different techniques used for pressure washing something as delicate as a wooden fence. After all, you want the deep down clean without doing any sort of damage to the material so that the look and integrity of the fence stays completely intact.

In the case of any sort of stains, mildew or mold on your wooden fences, you may want to try to use a mixture of bleach and detergent with your pressure washer. This can be done simply by adding a mixture of approximately 1/4 cup of laundry detergent and 1/4 cup of bleach into the reservoir of your pressure washer and then filling the rest of the way with water.

Adding the bleach will help to kill any of the bacteria that can be present with mold and mildew and the soap works to help you break down any grease, dirt or grime that has built up on the fence. When using a mixture such as this, you will want to go with a fan nozzle as it is wider.

In the case of a simple clean where you do not need to use a bleach and detergent mixture, you can simply use the pressure washer to spray down and clean the wooden fence by just using water. For a simple clean such as this, you can go with your higher powered tip that will give you great coverage with a nice, wide stream.

While cleaning the fence, you may want to be sure to use a good up and down motion. This will help you to get out more of the dirt and grime as you are going along with the grain of the wood.

A good tip when pressure washing a wooden fence is to start at the top and working your way down to the bottom. This will help you to limit the amount of debris that will fly back up onto the fencing. Also, when you are done with a section of the fence, you can always go back over the previous section to do a clean up on the area toward the bottom just in case there is any dirt or mud that found its way back up onto the ground from impact.

When you are new to pressure washing a material such as wooden fencing, it is always a good idea to try and start off on a lower pressure than you think is necessary. This will help you to get a good feel of the pressure, as it is always easier to use more pressure as you go to get the results that you desire.

Leave a Comment